QUICK EXPEDITION
Shipping in 48/72 hours (working days)
SECURE PAYMENT
3D Secure system
AVAILABLE STOCK
More than 500 products
LOYALTY POINTS
We think about you !
QUOTE REQUEST
Response in 24/48 hours
2" male BSP bulkhead fitting with 1 nut + seal
A bulkhead fitting identified as 2 inches
Ref. DIV-061 is described with a 2" male BSP connection, one nut and one seal. These three elements are the starting point for the check: the 2" diameter must not be confused with the 1" 1/2 model, even though the general bulkhead function is the same.
Prepare the bulkhead opening before assembly
The drilled opening and wall thickness must suit the part actually used. Offer the bulkhead fitting up without stress and keep enough access to position the nut. The contact area must be clean so that the stated seal can seat evenly.
Work from the male BSP outlet
Once the body is installed, the downstream accessory must be selected from the male BSP connection stated for this reference. Do not add a diameter or fitting type from another bulkhead fitting in the range by analogy.
Final check of ref. DIV-061
After installation, inspect nut security, seal position and absence of play through the wall. The leak test must remain appropriate to the container and liquid compatible with the installation. If there is a leak, first recheck the seating surface and assembly rather than applying excessive additional tightening.
wall-pass 1 "1/2 male gas
Pass wall 1 "male gas
