QUICK EXPEDITION
Shipping in 48/72 hours (working days)
SECURE PAYMENT
3D Secure system
AVAILABLE STOCK
More than 500 products
LOYALTY POINTS
We think about you !
QUOTE REQUEST
Response in 24/48 hours
Manual tool for PP, textile and composite strapping
Strapping type: Flat, horizontal or vertical strapping
Compatibility: Strapping from 9 to 19 mm
Specifications:
Organise the tensioning process
For a replacement or new installation, record the feed direction, width and position of the components before tensioning. The strapping and any closure must be installed using the method intended for the tool. An improvised adaptation must not replace the workstation procedure.
Check clamp compatibility
The manual tool for PP, textile and composite strapping must be checked by examining the strapping width, material family and type of closure used. A gripper or tensioner operates within a defined width range. A width outside that range may prevent correct guidance or tensioning of the strapping.
Information to retain
For the manual tool for PP, textile and composite strapping, several details are explicitly stated: Lightweight and robust; Strapping type: Flat, horizontal or vertical strapping; Compatibility: Strapping from 9 to 19 mm. Keep them with ref. CER-800 so that specifications from another item in the range are not applied by analogy.
What this product page states
When preparing a replenishment order, note Compatibility: Strapping from 9 to 19 mm; Strapping type: Flat, horizontal or vertical strapping; Lightweight and robust. These details identify the manual tool for PP, textile and composite strapping without treating a property observed only on another model as certain.
Check the moving parts
During the check, consider cleanliness, mechanical play and absence of visible deformation together. Surfaces that guide, grip or tension the strapping must remain in good condition. A damaged tool or one operating unusually must be removed from the workstation for inspection.
Strand composite wire to wire 13mm resistance 340kg 1100m mandrel 200mm
strapping or tension gripper for strip 25mm
