QUICK EXPEDITION
Shipping in 48/72 hours (working days)
SECURE PAYMENT
3D Secure system
AVAILABLE STOCK
More than 500 products
LOYALTY POINTS
We think about you !
QUOTE REQUEST
Response in 24/48 hours
2" male cam coupler with 1" (38 mm) barbed outlet
Specifications:
Check after installation
For ref. DIV-018-61, once the part is installed, inspect the connection before regular use. Before use, compare the alignment, absence of unusual play and a leak test appropriate to the circuit with the actual requirement. Any leak or deformation requires the assembly and the references used to be checked again.
Distinguish inlet from outlet
The check can start with the diameter, thread type, male or female orientation and outlet shape. A fitting is selected by considering its two sides separately. A single different dimension can prevent assembly even when the parts look similar.
Information to retain
For the 2" male cam coupler with 1" (38 mm) barbed outlet (ref. DIV-018-61), the product sheet states in particular Inlet diameter: 2"; Barbed outlet: 1" (38 mm); Type: Cam coupler. These data define this model and must remain linked when replacing or reordering it.
Specifications that must not be confused
When comparing this product with the existing item, check Type: Cam coupler; Barbed outlet: 1" (38 mm); Inlet diameter: 2". This information is specific to the 2" male cam coupler with 1" (38 mm) barbed outlet and is not a general specification applicable to the whole family.
Prepare the installation area carefully
When preparing the assembly or use, examine the threads, seating surfaces and locations intended for a seal where one is provided. Contact surfaces must be clean before installation. Extra tightening cannot compensate for an incorrect thread or unsuitable diameter.
Cam coupler 2'' male fluted 1'' 25mm
Cam coupler 2” male S60x6
Cam coupler 2'' male fluted 1'' 30mm
2“ male splined cam coupler 2” 50 mm
